
Thomson TTV-1640 Television
Camera side open & splitter block with 3 x CCDs
Technical
Use of CCDs allowed development of a new and very compact TTV 1640 Camera head, in a new and much shorter housing than that of the previous 1623/1624 tube Cameras. In terms of circuitry, it was necessary to learn to make sophisticated sampling and hold circuits to accommodate the still mediocre performance of CCDs… For the rest, video processing remained practically the same as that of tube Cameras… And there was no scanning… no registration.
Registration could at last be perfect for the three sensors… provided they were well glued. It was quite a new technology to glue sensors to the prism separator. With tubes, everything had been adjustable and it had been easy to reset the framing or target; we were somewhat hesitant to glue the CCDs down once and for all, but an intermediate frame system made it possible to replace a sensor without problem.
A gluing bench therefore had to be developed to ensure very precise positioning of the three sensors and hold them while the glue hardened. This technique is common today and thousands of CCDs have gone through our gluing bench. Accuracy is a few microns.
The first 500 pixel sensors still had greatly exaggerated sensitivity in the infra-red, and we had to work on optically filtering these long wavelengths very efficiently. The result was excellent behavior of the Camera, much better than that of the competing Sony Camera, yet produced with the same sensors.
B. Tichart