Museum of the Broadcast Television Camera

Philips PC60 studio camera side open

Philips/Norelco PC-60 studio television camera side open 

Here is the PC-60 with the side open, prismatic splitter block (sometimes called and "ice block"), the three scanning yokes with their head amplifiers in black perforated cases.
The two camera cables are marked Red and Green to help getting them the correct way around!

Dave Le Breton writes:-
I got to know the PC60 camera rather well as I had the task of fitting PC80 yoke assemblies to them all (for better registration).  Since the yoke mounting plates had to be changed as well, this involved a complete optical alignment - accomplished by the adjustment of threaded spacers that located the backplates onto the camera structure.  It was VERY tedious, but for some reason it was more bearable after a couple of pints at lunchtime! 

Another Philips modification to the PC60 that did not get into service in the BBC was the common line scan board.  Philips discovered that one of the main contributors to registration instability was the three separate line scan boards (the three identical vertical format boards to the top right of the interior picture) and their remote control of amplitude and linearity from the CCU.  They designed a single large board that plugged into all three connectors that had a single line scan output stage the fed each of the three yokes via a small variable inductor (for width) and a variable resistor (for linearity).  As far as I remember it worked well on a brief field trial, but the OB engineers were not at all happy about giving up their remote controls.

 

BBC research dept report on registration errors and Yoke matching, PH-18 :- http://downloads.bbc.co.uk/rd/pubs/reports/1968-24.pdf

    Brochure
    Local Index
    Back

    Page 6 of 11