Museum of the Broadcast Television Camera

E-mail Received, 3 July 2026

The camera Marconi MkIX

 

blank

Neil Friday writes:-


Whilst I am still alive, I thought it relevant to mention a few anecdotes.

On your Marconi Mk IXB B3265B brochure, the colour picture of a "cameraman" is myself.
When at O.S.G. at Waterhouse Lane, Chelmsford, my boss Terry Barritt asked if I would like to "star" in one of the colour brochures on the camera. I replied yes but with one big clause, in that the shot has to be seen as if a real cameraman was taking it. Such that the zoom lens controls were in the correct place and the headset not blocking the face etc.
All was well and after dressing the camera, all looked good. Alas the photographer asked that I should squeeze nearer to the camera to reduce the overall width. A good compromise was set.

On reference to the MK IX "lantern" , we called it a CHIMNEY !!
On the MK X camera, I regularly visited many times a day, the deployment labs upstairs, to see progress on new items and to offer my professional advice on various matters. For example, for the MK IX camera when in use out of doors in middle east countries, the use of black paint was literally a scorcher. Replacing it with all white was a natural way forward, but apparently cost problems arose - so hell to the reliability !!

Then for dust covers from Granada studios to LWT, it was common practice within studios, to park all the cameras in a corner whilst the sets were changed. The blue plastic covers were so effective that they caused the cameras to overheat, as there was no-where for the hot air to exhaust.

 

Lastly on the topic of reliability, When I was modifying an OB van from MK V to MK IX colour cameras, in Bagdad, Iraq, I could not understand how on one day all cameras were working and the next day, lots of camera faults were occurring. So in that instance, the answer was not to switch the cameras on soak test, whilst other equipment was being installed and set up. No switched on cameras equals no faults !!

With some decades later and internet available, I found out that my camera failures were due to the action of the cameras being switched OFF (and not on). What was happening was that on a number of pcb´s that had built-in lower voltage regulators that with number of IC´s and transistors, that some of the voltages did not collapse all at the same time with effectively instances of some rails becoming negative across fet gates etc, thus causing failures.

Anyway, let me pause for now.

All the best, Neil Friday
Marconi Engineer.