
Marconi Mk VII Television Camera type B3205
An extra close up of the
Luminance yoke on the (cable) side of the camera. A nasty spot of corrosion
is visible on the top plate of the head amplifier. Two of the four head output
video amplifiers modules have been unplugged to reveal the head amplifier and the damage.
Of note is the Nuvistor preamplifier valve on the box to the left of the yoke. In order to get the best noise figure and frequency response the first amplifier device in mounted as close as possible to the Plumbicon target ring.
The Nuvistor is a very small valve little bigger than some of the transistors
of the time, but with a much higher input impedance. They were later
replaced by FETs. (Field Effect Transistors).