Museum of the Broadcast Television Camera

EMI type 8A CCTV Camera

EMI type 8 CCTV Camera, picture of test card.

An off screen photo of the camera viewing a test card. The type EEV P844 separate mesh vidicon installed in the camera was showing beam focus errors at the right side of the image. In this case the mesh was connected to the wall anode, so the tube was operating as an integral mesh tube.

It is also possible that the line scan voltage was modulating the focus voltage, due to ineffective decoupling.

All In all not too bad for a secondhand tube and camera possibly 50 years old.

 

 

 

    Datasheet
    Local Index
    Back

    Page 6 of 9