
Dage type 101 Television Camera Valve layout
MODEL lOl-A
SPECIFICATIONS:-
POWER INPUT:- 117v. AC 50/60cps. @ 100watts
SCANNING:-
Fields 50/60 per second locked to power line frequency
H. Frequency 15,750cps. (nominal)
RESOLUTION:-
Limited to resolution of type 6198 vidicon camera tube, 400 lines or
better.
OPTICAL:-
Light requirements with fast lens approximately 50 footcandles incident illumination. Readable pictures can be obtained at
10 footcandles or less.
Spectral response is approximately the same as the human eye.
Lens, l6 mm. "C" mount. Lens must be
in focusing mounting.
OUTPUT:-
Video ...........................output level IV pp. Composite.
Connector .................standard BNC (UG-625/U)
MODULATION:-
Double side-band amplitude modulated carrier, Adjustable sync level. Frequency,
tunable through lower VHF band. Normally shipped from factory tuned to Channel 40
Connector Standard BNC (UG-625/U) 75 ohms Impedance.
Output level Approximately .001 volts.
VIEWFINDER 3" Electrostatic focus and deflection Cathode Ray Tube.
MECHANICAL:-
Temperature Range 40 to 130 Deg. F Ambient.
Camera Mounting 1/4 - 20 Tapped mounting for standard tripod 8-32 tapped mounting on 5 inch centres for bracket mountings.
Case Dimensions Height 9 3/8", Width 4 5/8", Length ??
Finish Blue-gray hammertone.
Weight 18 pounds.
Shipping Weight 27 pounds.
SPECIFICATIONS; MODEL 101-AF
Same as Model lOl-A. accept with addition of optical focus knob on side of Camera.
This knob slides the vidicon and yoke assembly on support rods behind lens to
obtain correct optical focus.
Drawings and specification provided by K. Hempson.